2005 Alpina B7 vs. 2010 Ford Bantam

To start off, 2010 Ford Bantam is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Alpina B7. In addition, the cost of maintenance, including insurance, on 2005 Alpina B7 would be higher. At 4,398 cc (8 cylinders), 2005 Alpina B7 is equipped with a bigger engine. In terms of performance, 2005 Alpina B7 (492 HP @ 5500 RPM) has 398 more horse power than 2010 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 2005 Alpina B7 should accelerate faster than 2010 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2005 Alpina B7 weights approximately 966 kg more than 2010 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Alpina B7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Alpina B7. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Alpina B7 (700 Nm @ 4250 RPM) has 565 more torque (in Nm) than 2010 Ford Bantam. (135 Nm @ 2500 RPM). This means 2005 Alpina B7 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Bantam. 2005 Alpina B7 has automatic transmission and 2010 Ford Bantam has manual transmission. 2010 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Alpina B7 will be easier to drive especially in heavy traffic.

Compare all specifications:

2005 Alpina B7 2010 Ford Bantam
Make Alpina Ford
Model B7 Bantam
Year Released 2005 2010
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 4398 cc 1597 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 492 HP 94 HP
Engine RPM 5500 RPM 5500 RPM
Torque 700 Nm 135 Nm
Torque RPM 4250 RPM 2500 RPM
Engine Bore Size 92 mm 82 mm
Engine Stroke Size 82.7 mm 75.5 mm
Engine Compression Ratio 9.0:1 9.5:1
Fuel Type Gasoline - Premium Gasoline
Top Speed 300 km/hour 176 km/hour
Acceleration 0-100mph 5.5 seconds 11.2 seconds
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1950 kg 984 kg
Vehicle Length 5040 mm 4280 mm
Vehicle Width 1910 mm 1470 mm
Vehicle Height 1480 mm 1640 mm
Wheelbase Size 3000 mm 2670 mm
Fuel Tank Capacity 88 L 54 L