2005 Audi A4 vs. 1971 Holden Monaro

To start off, 2005 Audi A4 is newer by 34 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 5,040 cc (8 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 1971 Holden Monaro (238 HP @ 4600 RPM) has 77 more horse power than 2005 Audi A4. (161 HP @ 4000 RPM) In normal driving conditions, 1971 Holden Monaro should accelerate faster than 2005 Audi A4. With that said, vehicle weight also plays an important factor in acceleration. 2005 Audi A4 weights approximately 245 kg more than 1971 Holden Monaro.

Because 1971 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 2005 Audi A4, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Monaro (427 Nm @ 3000 RPM) has 77 more torque (in Nm) than 2005 Audi A4. (350 Nm @ 1500 RPM). This means 1971 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2005 Audi A4.

Compare all specifications:

2005 Audi A4 1971 Holden Monaro
Make Audi Holden
Model A4 Monaro
Year Released 2005 1971
Engine Position Front Front
Engine Size 2393 cc 5040 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V in-line
Horse Power 161 HP 238 HP
Engine RPM 4000 RPM 4600 RPM
Torque 350 Nm 427 Nm
Torque RPM 1500 RPM 3000 RPM
Fuel Type Diesel Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Vehicle Weight 1625 kg 1380 kg
Vehicle Length 4550 mm 4770 mm
Vehicle Width 1780 mm 1890 mm
Vehicle Height 1430 mm 1360 mm
Wheelbase Size 2660 mm 2830 mm