2005 Avanti Studebaker vs. 1952 Fiat 1900
To start off, 2005 Avanti Studebaker is newer by 53 year(s). Which means there will be less support and parts availability for 1952 Fiat 1900. In addition, the cost of maintenance, including insurance, on 1952 Fiat 1900 would be higher. At 6,751 cc (10 cylinders), 2005 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2005 Avanti Studebaker (307 HP @ 4250 RPM) has 255 more horse power than 1952 Fiat 1900. (52 HP @ 3700 RPM). In normal driving conditions, 2005 Avanti Studebaker should accelerate faster than 1952 Fiat 1900. With that said, vehicle weight also plays an important factor in acceleration. 2005 Avanti Studebaker weights approximately 1600 kg more than 1952 Fiat 1900. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1952 Fiat 1900. In wet, icy, snow, or gravel driving conditions, 2005 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Avanti Studebaker (425 Nm @ 3250 RPM) has 294 more torque (in Nm) than 1952 Fiat 1900. (131 Nm @ 2600 RPM). This means 2005 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1952 Fiat 1900. 2005 Avanti Studebaker has automatic transmission and 1952 Fiat 1900 has manual transmission. 1952 Fiat 1900 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Avanti Studebaker | 1952 Fiat 1900 | |
Make | Avanti | Fiat |
Model | Studebaker | 1900 |
Year Released | 2005 | 1952 |
Engine Position | Front | Front |
Engine Size | 6751 cc | 1901 cc |
Engine Cylinders | 10 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 307 HP | 52 HP |
Engine RPM | 4250 RPM | 3700 RPM |
Torque | 425 Nm | 131 Nm |
Torque RPM | 3250 RPM | 2600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 2775 kg | 1175 kg |
Vehicle Length | 5490 mm | 4310 mm |
Vehicle Width | 2040 mm | 1680 mm |
Vehicle Height | 2040 mm | 1530 mm |
Wheelbase Size | 3410 mm | 2660 mm |