2005 Avanti Studebaker vs. 1974 BMW 3
To start off, 2005 Avanti Studebaker is newer by 31 year(s). Which means there will be less support and parts availability for 1974 BMW 3. In addition, the cost of maintenance, including insurance, on 1974 BMW 3 would be higher. At 6,751 cc (10 cylinders), 2005 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2005 Avanti Studebaker (307 HP @ 4250 RPM) has 107 more horse power than 1974 BMW 3. (200 HP @ 5500 RPM). In normal driving conditions, 2005 Avanti Studebaker should accelerate faster than 1974 BMW 3. With that said, vehicle weight also plays an important factor in acceleration. 2005 Avanti Studebaker weights approximately 1342 kg more than 1974 BMW 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 1974 BMW 3. In wet, icy, snow, or gravel driving conditions, 2005 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Avanti Studebaker (425 Nm @ 3250 RPM) has 155 more torque (in Nm) than 1974 BMW 3. (270 Nm @ 4300 RPM). This means 2005 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 1974 BMW 3. 2005 Avanti Studebaker has automatic transmission and 1974 BMW 3 has manual transmission. 1974 BMW 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2005 Avanti Studebaker | 1974 BMW 3 | |
| Make | Avanti | BMW |
| Model | Studebaker | 3 |
| Year Released | 2005 | 1974 |
| Engine Position | Front | Front |
| Engine Size | 6751 cc | 2986 cc |
| Engine Cylinders | 10 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 307 HP | 200 HP |
| Engine RPM | 4250 RPM | 5500 RPM |
| Torque | 425 Nm | 270 Nm |
| Torque RPM | 3250 RPM | 4300 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 2775 kg | 1433 kg |
| Vehicle Length | 5490 mm | 4720 mm |
| Vehicle Width | 2040 mm | 1760 mm |
| Vehicle Height | 2040 mm | 1460 mm |
| Wheelbase Size | 3410 mm | 2700 mm |
