2005 Avanti Studebaker vs. 2002 MCC Smart
To start off, 2005 Avanti Studebaker is newer by 3 year(s). Which means there will be less support and parts availability for 2002 MCC Smart. In addition, the cost of maintenance, including insurance, on 2002 MCC Smart would be higher. At 6,751 cc (10 cylinders), 2005 Avanti Studebaker is equipped with a bigger engine. In terms of performance, 2005 Avanti Studebaker (307 HP @ 4250 RPM) has 227 more horse power than 2002 MCC Smart. (80 HP @ 5250 RPM). In normal driving conditions, 2005 Avanti Studebaker should accelerate faster than 2002 MCC Smart. With that said, vehicle weight also plays an important factor in acceleration. 2005 Avanti Studebaker weights approximately 1959 kg more than 2002 MCC Smart. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Avanti Studebaker is four wheel drive (4WD), it will have significant more traction and grip than 2002 MCC Smart. In wet, icy, snow, or gravel driving conditions, 2005 Avanti Studebaker will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Avanti Studebaker (425 Nm @ 3250 RPM) has 315 more torque (in Nm) than 2002 MCC Smart. (110 Nm @ 3000 RPM). This means 2005 Avanti Studebaker will have an easier job in driving up hills or pulling heavy equipment than 2002 MCC Smart. 2005 Avanti Studebaker has automatic transmission and 2002 MCC Smart has manual transmission. 2002 MCC Smart will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Avanti Studebaker will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2005 Avanti Studebaker | 2002 MCC Smart | |
| Make | Avanti | MCC |
| Model | Studebaker | Smart |
| Year Released | 2005 | 2002 |
| Engine Position | Front | Rear |
| Engine Size | 6751 cc | 698 cc |
| Engine Cylinders | 10 cylinders | 3 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 307 HP | 80 HP |
| Engine RPM | 4250 RPM | 5250 RPM |
| Torque | 425 Nm | 110 Nm |
| Torque RPM | 3250 RPM | 3000 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 2775 kg | 816 kg |
| Vehicle Length | 5490 mm | 3430 mm |
| Vehicle Width | 2040 mm | 1620 mm |
| Vehicle Height | 2040 mm | 1200 mm |
| Wheelbase Size | 3410 mm | 2370 mm |
