2005 BMW 525 vs. 2012 Hyundai i10

To start off, 2012 Hyundai i10 is newer by 7 year(s). Which means there will be less support and parts availability for 2005 BMW 525. In addition, the cost of maintenance, including insurance, on 2005 BMW 525 would be higher. At 2,495 cc (6 cylinders), 2005 BMW 525 is equipped with a bigger engine. In terms of performance, 2005 BMW 525 (215 HP @ 6500 RPM) has 147 more horse power than 2012 Hyundai i10. (68 HP @ 6200 RPM). In normal driving conditions, 2005 BMW 525 should accelerate faster than 2012 Hyundai i10. With that said, vehicle weight also plays an important factor in acceleration. 2005 BMW 525 weights approximately 622 kg more than 2012 Hyundai i10. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 BMW 525 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 BMW 525. However, in wet, icy, snow, or gravel driving conditions, 2012 Hyundai i10, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 BMW 525 (250 Nm @ 2750 RPM) has 155 more torque (in Nm) than 2012 Hyundai i10. (95 Nm @ 3500 RPM). This means 2005 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 2012 Hyundai i10. 2005 BMW 525 has automatic transmission and 2012 Hyundai i10 has manual transmission. 2012 Hyundai i10 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 BMW 525 will be easier to drive especially in heavy traffic.

Compare all specifications:

2005 BMW 525 2012 Hyundai i10
Make BMW Hyundai
Model 525 i10
Year Released 2005 2012
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2495 cc 996 cc
Engine Cylinders 6 cylinders 3 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 215 HP 68 HP
Engine RPM 6500 RPM 6200 RPM
Torque 250 Nm 95 Nm
Torque RPM 2750 RPM 3500 RPM
Engine Bore Size 82 mm 71 mm
Engine Stroke Size 78.8 mm 84 mm
Engine Compression Ratio 11.0:1 10.1:1
Top Speed 242 km/hour 150 km/hour
Acceleration 0-100mph 7.9 seconds 14.8 seconds
Drive Type Rear Front
Transmission Type Automatic 5-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1570 kg 948 kg
Vehicle Length 4780 mm 3565 mm
Vehicle Width 1810 mm 1595 mm
Vehicle Height 1440 mm 1540 mm
Wheelbase Size 3000 mm 2380 mm
Fuel Consumption Highway 7.9 L/100km 3.8 L/100km
Fuel Consumption City 14.4 L/100km 5 L/100km
Fuel Consumption Overall 10.3 L/100km 4.2 L/100km