2005 BMW 530 vs. 1973 Holden UTE

To start off, 2005 BMW 530 is newer by 32 year(s). Which means there will be less support and parts availability for 1973 Holden UTE. In addition, the cost of maintenance, including insurance, on 1973 Holden UTE would be higher. At 5,047 cc (8 cylinders), 1973 Holden UTE is equipped with a bigger engine. In terms of performance, 2005 BMW 530 (254 HP @ 6000 RPM) has 14 more horse power than 1973 Holden UTE. (240 HP @ 4800 RPM). In normal driving conditions, 2005 BMW 530 should accelerate faster than 1973 Holden UTE.

Because 2005 BMW 530 is four wheel drive (4WD), it will have significant more traction and grip than 1973 Holden UTE. In wet, icy, snow, or gravel driving conditions, 2005 BMW 530 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Holden UTE (427 Nm @ 3000 RPM) has 127 more torque (in Nm) than 2005 BMW 530. (300 Nm @ 2500 RPM). This means 1973 Holden UTE will have an easier job in driving up hills or pulling heavy equipment than 2005 BMW 530.

Compare all specifications:

2005 BMW 530 1973 Holden UTE
Make BMW Holden
Model 530 UTE
Year Released 2005 1973
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 2999 cc 5047 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 254 HP 240 HP
Engine RPM 6000 RPM 4800 RPM
Torque 300 Nm 427 Nm
Torque RPM 2500 RPM 3000 RPM
Engine Bore Size 85.1 mm 101.6 mm
Engine Stroke Size 88 mm 77.8 mm
Engine Compression Ratio 10.7:1 9.0:1
Drive Type 4WD Rear
Transmission Type Automatic Automatic
Number of Seats 5 seats 3 seats
Number of Doors 4 doors 2 doors
Vehicle Length 4850 mm 4890 mm
Vehicle Width 1850 mm 1880 mm
Vehicle Height 1490 mm 1390 mm
Fuel Tank Capacity 70 L 75 L