2005 Chevrolet Impala vs. 1988 Honda Shuttle

To start off, 2005 Chevrolet Impala is newer by 17 year(s). Which means there will be less support and parts availability for 1988 Honda Shuttle. In addition, the cost of maintenance, including insurance, on 1988 Honda Shuttle would be higher. At 3,786 cc (6 cylinders), 2005 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2005 Chevrolet Impala (200 HP @ 6000 RPM) has 110 more horse power than 1988 Honda Shuttle. (90 HP @ 6300 RPM). In normal driving conditions, 2005 Chevrolet Impala should accelerate faster than 1988 Honda Shuttle. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chevrolet Impala weights approximately 574 kg more than 1988 Honda Shuttle. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Chevrolet Impala (305 Nm) has 193 more torque (in Nm) than 1988 Honda Shuttle. (112 Nm). This means 2005 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 1988 Honda Shuttle.

Compare all specifications:

2005 Chevrolet Impala 1988 Honda Shuttle
Make Chevrolet Honda
Model Impala Shuttle
Year Released 2005 1988
Body Type Sedan Minivan
Engine Position Front Front
Engine Size 3786 cc 1396 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 3 valves
Horse Power 200 HP 90 HP
Engine RPM 6000 RPM 6300 RPM
Torque 305 Nm 112 Nm
Drive Type Front Front
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1514 kg 940 kg
Vehicle Length 5090 mm 4110 mm
Vehicle Width 1860 mm 1660 mm
Vehicle Height 1460 mm 1520 mm
Wheelbase Size 2810 mm 2510 mm