2005 Chrysler 300 vs. 1968 Fiat 600
To start off, 2005 Chrysler 300 is newer by 37 year(s). Which means there will be less support and parts availability for 1968 Fiat 600. In addition, the cost of maintenance, including insurance, on 1968 Fiat 600 would be higher. At 3,518 cc (6 cylinders), 2005 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2005 Chrysler 300 (253 HP @ 6400 RPM) has 230 more horse power than 1968 Fiat 600. (23 HP @ 4500 RPM). In normal driving conditions, 2005 Chrysler 300 should accelerate faster than 1968 Fiat 600. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chrysler 300 weights approximately 724 kg more than 1968 Fiat 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2005 Chrysler 300 (332 Nm) has 287 more torque (in Nm) than 1968 Fiat 600. (45 Nm). This means 2005 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat 600.
Compare all specifications:
| 2005 Chrysler 300 | 1968 Fiat 600 | |
| Make | Chrysler | Fiat |
| Model | 300 | 600 |
| Year Released | 2005 | 1968 |
| Engine Position | Front | Rear |
| Engine Size | 3518 cc | 767 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 253 HP | 23 HP |
| Engine RPM | 6400 RPM | 4500 RPM |
| Torque | 332 Nm | 45 Nm |
| Engine Compression Ratio | 9.9:1 | 9.0:1 |
| Number of Seats | 5 seats | 6 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1554 kg | 830 kg |
| Vehicle Length | 5010 mm | 3550 mm |
| Vehicle Width | 1890 mm | 1450 mm |
| Vehicle Height | 1490 mm | 1590 mm |
| Wheelbase Size | 2960 mm | 2010 mm |
| Fuel Tank Capacity | 72 L | 38 L |
