2005 Chrysler 300 vs. 2004 Ginetta G34
To start off, 2005 Chrysler 300 is newer by 1 year(s). Which means there will be less support and parts availability for 2004 Ginetta G34. In addition, the cost of maintenance, including insurance, on 2004 Ginetta G34 would be higher. At 5,654 cc (8 cylinders), 2005 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2005 Chrysler 300 (335 HP @ 5000 RPM) has 148 more horse power than 2004 Ginetta G34. (187 HP @ 5600 RPM). In normal driving conditions, 2005 Chrysler 300 should accelerate faster than 2004 Ginetta G34. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chrysler 300 weights approximately 1100 kg more than 2004 Ginetta G34. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2005 Chrysler 300 (529 Nm @ 4000 RPM) has 249 more torque (in Nm) than 2004 Ginetta G34. (280 Nm @ 2900 RPM). This means 2005 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 2004 Ginetta G34. 2005 Chrysler 300 has automatic transmission and 2004 Ginetta G34 has manual transmission. 2004 Ginetta G34 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Chrysler 300 | 2004 Ginetta G34 | |
Make | Chrysler | Ginetta |
Model | 300 | G34 |
Year Released | 2005 | 2004 |
Engine Position | Front | Middle |
Engine Size | 5654 cc | 1998 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 335 HP | 187 HP |
Engine RPM | 5000 RPM | 5600 RPM |
Torque | 529 Nm | 280 Nm |
Torque RPM | 4000 RPM | 2900 RPM |
Fuel Type | Gasoline - Premium | Gasoline |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1910 kg | 810 kg |
Vehicle Length | 5010 mm | 3970 mm |
Vehicle Width | 1890 mm | 1650 mm |
Vehicle Height | 1490 mm | 1050 mm |