2005 Chrysler Concorde vs. 1988 Ferrari 412 GT
To start off, 2005 Chrysler Concorde is newer by 17 year(s). Which means there will be less support and parts availability for 1988 Ferrari 412 GT. In addition, the cost of maintenance, including insurance, on 1988 Ferrari 412 GT would be higher. At 4,942 cc (12 cylinders), 1988 Ferrari 412 GT is equipped with a bigger engine. In terms of performance, 1988 Ferrari 412 GT (340 HP @ 6000 RPM) has 139 more horse power than 2005 Chrysler Concorde. (201 HP @ 5700 RPM) In normal driving conditions, 1988 Ferrari 412 GT should accelerate faster than 2005 Chrysler Concorde. With that said, vehicle weight also plays an important factor in acceleration. 1988 Ferrari 412 GT weights approximately 310 kg more than 2005 Chrysler Concorde. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1988 Ferrari 412 GT is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1988 Ferrari 412 GT. However, in wet, icy, snow, or gravel driving conditions, 2005 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Ferrari 412 GT (451 Nm @ 4200 RPM) has 193 more torque (in Nm) than 2005 Chrysler Concorde. (258 Nm @ 4850 RPM). This means 1988 Ferrari 412 GT will have an easier job in driving up hills or pulling heavy equipment than 2005 Chrysler Concorde. 2005 Chrysler Concorde has automatic transmission and 1988 Ferrari 412 GT has manual transmission. 1988 Ferrari 412 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Chrysler Concorde | 1988 Ferrari 412 GT | |
Make | Chrysler | Ferrari |
Model | Concorde | 412 GT |
Year Released | 2005 | 1988 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 2736 cc | 4942 cc |
Engine Cylinders | 6 cylinders | 12 cylinders |
Engine Type | V | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 201 HP | 340 HP |
Engine RPM | 5700 RPM | 6000 RPM |
Torque | 258 Nm | 451 Nm |
Torque RPM | 4850 RPM | 4200 RPM |
Engine Bore Size | 86 mm | 82.1 mm |
Engine Stroke Size | 78.5 mm | 78 mm |
Engine Compression Ratio | 10.0:1 | 9.6:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1575 kg | 1885 kg |
Vehicle Length | 5280 mm | 4820 mm |
Vehicle Width | 1900 mm | 1800 mm |
Vehicle Height | 1420 mm | 1320 mm |
Wheelbase Size | 2880 mm | 2710 mm |
Fuel Tank Capacity | 68 L | 120 L |