2005 Chrysler Sebring vs. 1963 Lancia Flaminia
To start off, 2005 Chrysler Sebring is newer by 42 year(s). Which means there will be less support and parts availability for 1963 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Flaminia would be higher. At 2,775 cc (6 cylinders), 1963 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 2005 Chrysler Sebring (200 HP @ 5900 RPM) has 52 more horse power than 1963 Lancia Flaminia. (148 HP @ 5400 RPM). In normal driving conditions, 2005 Chrysler Sebring should accelerate faster than 1963 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chrysler Sebring weights approximately 245 kg more than 1963 Lancia Flaminia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2005 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Chrysler Sebring (262 Nm @ 4300 RPM) has 37 more torque (in Nm) than 1963 Lancia Flaminia. (225 Nm @ 3500 RPM). This means 2005 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Flaminia. 2005 Chrysler Sebring has automatic transmission and 1963 Lancia Flaminia has manual transmission. 1963 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Chrysler Sebring | 1963 Lancia Flaminia | |
Make | Chrysler | Lancia |
Model | Sebring | Flaminia |
Year Released | 2005 | 1963 |
Engine Position | Front | Front |
Engine Size | 2736 cc | 2775 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 200 HP | 148 HP |
Engine RPM | 5900 RPM | 5400 RPM |
Torque | 262 Nm | 225 Nm |
Torque RPM | 4300 RPM | 3500 RPM |
Engine Bore Size | 86.1 mm | 85 mm |
Engine Stroke Size | 78.5 mm | 81.5 mm |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 2 seats |
Vehicle Weight | 1665 kg | 1420 kg |
Vehicle Length | 4930 mm | 4510 mm |
Vehicle Width | 1800 mm | 1670 mm |
Vehicle Height | 1410 mm | 1290 mm |
Wheelbase Size | 2700 mm | 2530 mm |