2005 Chrysler Sebring vs. 2008 Isuzu I-290

To start off, 2008 Isuzu I-290 is newer by 3 year(s). Which means there will be less support and parts availability for 2005 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2005 Chrysler Sebring would be higher. At 2,901 cc (4 cylinders), 2008 Isuzu I-290 is equipped with a bigger engine. In terms of performance, 2005 Chrysler Sebring (200 HP @ 6400 RPM) has 15 more horse power than 2008 Isuzu I-290. (185 HP @ 5600 RPM). In normal driving conditions, 2005 Chrysler Sebring should accelerate faster than 2008 Isuzu I-290.

Because 2008 Isuzu I-290 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Isuzu I-290. However, in wet, icy, snow, or gravel driving conditions, 2005 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 258 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.

Compare all specifications:

2005 Chrysler Sebring 2008 Isuzu I-290
Make Chrysler Isuzu
Model Sebring I-290
Year Released 2005 2008
Engine Position Front Front
Engine Size 2737 cc 2901 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 200 HP 185 HP
Engine RPM 6400 RPM 5600 RPM
Torque 258 Nm 258 Nm
Engine Compression Ratio 9.9:1 10.3:1
Drive Type Front Rear
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Length 4850 mm 5270 mm
Vehicle Width 1800 mm 1720 mm
Vehicle Height 1400 mm 1650 mm
Wheelbase Size 2620 mm 3210 mm
Fuel Tank Capacity 61 L 74 L