2005 Citroen C4 vs. 1968 Holden Monaro
To start off, 2005 Citroen C4 is newer by 37 year(s). Which means there will be less support and parts availability for 1968 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1968 Holden Monaro would be higher. At 5,354 cc (8 cylinders), 1968 Holden Monaro is equipped with a bigger engine. In terms of performance, 1968 Holden Monaro (215 HP @ 4800 RPM) has 39 more horse power than 2005 Citroen C4. (176 HP @ 7000 RPM) In normal driving conditions, 1968 Holden Monaro should accelerate faster than 2005 Citroen C4.
Because 1968 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 2005 Citroen C4, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Holden Monaro (443 Nm @ 3200 RPM) has 243 more torque (in Nm) than 2005 Citroen C4. (200 Nm @ 4750 RPM). This means 1968 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2005 Citroen C4.
Compare all specifications:
| 2005 Citroen C4 | 1968 Holden Monaro | |
| Make | Citroen | Holden |
| Model | C4 | Monaro |
| Year Released | 2005 | 1968 |
| Engine Position | Front | Front |
| Engine Size | 1997 cc | 5354 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 176 HP | 215 HP |
| Engine RPM | 7000 RPM | 4800 RPM |
| Torque | 200 Nm | 443 Nm |
| Torque RPM | 4750 RPM | 3200 RPM |
| Fuel Type | Gasoline - Premium | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Length | 4280 mm | 4700 mm |
| Vehicle Width | 1780 mm | 1830 mm |
| Vehicle Height | 1460 mm | 1400 mm |
| Wheelbase Size | 2610 mm | 2830 mm |
