2005 Fiat Albea vs. 2010 Ford Crown Victoria
To start off, 2010 Ford Crown Victoria is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Fiat Albea. In addition, the cost of maintenance, including insurance, on 2005 Fiat Albea would be higher. At 4,605 cc (8 cylinders), 2010 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2010 Ford Crown Victoria (224 HP @ 4750 RPM) has 165 more horse power than 2005 Fiat Albea. (59 HP @ 5500 RPM) In normal driving conditions, 2010 Ford Crown Victoria should accelerate faster than 2005 Fiat Albea. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Crown Victoria weights approximately 1841 kg more than 2005 Fiat Albea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2005 Fiat Albea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Crown Victoria (359 Nm @ 4000 RPM) has 257 more torque (in Nm) than 2005 Fiat Albea. (102 Nm @ 2500 RPM). This means 2010 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2005 Fiat Albea. 2010 Ford Crown Victoria has automatic transmission and 2005 Fiat Albea has manual transmission. 2005 Fiat Albea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Fiat Albea | 2010 Ford Crown Victoria | |
Make | Fiat | Ford |
Model | Albea | Crown Victoria |
Year Released | 2005 | 2010 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 1248 cc | 4605 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 224 HP |
Engine RPM | 5500 RPM | 4750 RPM |
Torque | 102 Nm | 359 Nm |
Torque RPM | 2500 RPM | 4000 RPM |
Engine Bore Size | 70.9 mm | 90.2 mm |
Engine Stroke Size | 78.9 mm | 90 mm |
Engine Compression Ratio | 10.0:1 | 8.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 6 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1015 kg | 2856 kg |
Vehicle Length | 4190 mm | 5390 mm |
Vehicle Width | 1710 mm | 1970 mm |
Vehicle Height | 1500 mm | 1450 mm |
Wheelbase Size | 2440 mm | 2920 mm |
Fuel Tank Capacity | 58 L | 72 L |