2005 Fiat Siena vs. 1948 Jeep CJ3A
To start off, 2005 Fiat Siena is newer by 57 year(s). Which means there will be less support and parts availability for 1948 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1948 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1948 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 2005 Fiat Siena (70 HP @ 5750 RPM) has 11 more horse power than 1948 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 2005 Fiat Siena should accelerate faster than 1948 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1948 Jeep CJ3A weights approximately 90 kg more than 2005 Fiat Siena.
Because 1948 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 2005 Fiat Siena. In wet, icy, snow, or gravel driving conditions, 1948 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1948 Jeep CJ3A (145 Nm @ 3600 RPM) has 50 more torque (in Nm) than 2005 Fiat Siena. (95 Nm @ 4000 RPM). This means 1948 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 2005 Fiat Siena.
Compare all specifications:
2005 Fiat Siena | 1948 Jeep CJ3A | |
Make | Fiat | Jeep |
Model | Siena | CJ3A |
Year Released | 2005 | 1948 |
Body Type | Sedan | SUV |
Engine Position | Front | Front |
Engine Size | 999 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 70 HP | 59 HP |
Engine RPM | 5750 RPM | 3600 RPM |
Torque | 95 Nm | 145 Nm |
Torque RPM | 4000 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1020 kg | 1110 kg |
Vehicle Length | 4110 mm | 3130 mm |
Vehicle Width | 1630 mm | 1460 mm |
Vehicle Height | 1470 mm | 1630 mm |
Wheelbase Size | 2380 mm | 2040 mm |