2005 Ford Bantam vs. 1958 MG MGA

To start off, 2005 Ford Bantam is newer by 47 year(s). Which means there will be less support and parts availability for 1958 MG MGA. In addition, the cost of maintenance, including insurance, on 1958 MG MGA would be higher. At 1,489 cc (4 cylinders), 1958 MG MGA is equipped with a bigger engine. In terms of performance, 2005 Ford Bantam (74 HP) has 3 more horse power than 1958 MG MGA. (71 HP). In normal driving conditions, 2005 Ford Bantam should accelerate faster than 1958 MG MGA. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Bantam weights approximately 114 kg more than 1958 MG MGA. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1958 MG MGA is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 MG MGA. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Ford Bantam (111 Nm @ 2500 RPM) has 7 more torque (in Nm) than 1958 MG MGA. (104 Nm @ 3500 RPM). This means 2005 Ford Bantam will have an easier job in driving up hills or pulling heavy equipment than 1958 MG MGA.

Compare all specifications:

2005 Ford Bantam 1958 MG MGA
Make Ford MG
Model Bantam MGA
Year Released 2005 1958
Body Type Pickup Convertible
Engine Position Front Front
Engine Size 1297 cc 1489 cc
Valves per Cylinder 2 valves 2 valves
Horse Power 74 HP 71 HP
Torque 111 Nm 104 Nm
Torque RPM 2500 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1014 kg 900 kg
Wheelbase Size 2550 mm 2390 mm