2005 Ford Bantam vs. 1975 Holden Statesman
To start off, 2005 Ford Bantam is newer by 30 year(s). Which means there will be less support and parts availability for 1975 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1975 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1975 Holden Statesman is equipped with a bigger engine. In terms of performance, 1975 Holden Statesman (238 HP @ 4600 RPM) has 144 more horse power than 2005 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 1975 Holden Statesman should accelerate faster than 2005 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1975 Holden Statesman weights approximately 499 kg more than 2005 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Holden Statesman (427 Nm @ 3000 RPM) has 290 more torque (in Nm) than 2005 Ford Bantam. (137 Nm @ 2500 RPM). This means 1975 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Bantam. 1975 Holden Statesman has automatic transmission and 2005 Ford Bantam has manual transmission. 2005 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1975 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Ford Bantam | 1975 Holden Statesman | |
Make | Ford | Holden |
Model | Bantam | Statesman |
Year Released | 2005 | 1975 |
Engine Position | Front | Front |
Engine Size | 1597 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 94 HP | 238 HP |
Engine RPM | 5500 RPM | 4600 RPM |
Torque | 137 Nm | 427 Nm |
Torque RPM | 2500 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1036 kg | 1535 kg |
Wheelbase Size | 2620 mm | 2900 mm |