2005 Ford Bantam vs. 1992 Holden Commodore
To start off, 2005 Ford Bantam is newer by 13 year(s). Which means there will be less support and parts availability for 1992 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1992 Holden Commodore would be higher. At 3,791 cc (6 cylinders), 1992 Holden Commodore is equipped with a bigger engine. In terms of performance, 1992 Holden Commodore (171 HP @ 4800 RPM) has 77 more horse power than 2005 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 1992 Holden Commodore should accelerate faster than 2005 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1992 Holden Commodore weights approximately 359 kg more than 2005 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Holden Commodore (288 Nm @ 3200 RPM) has 151 more torque (in Nm) than 2005 Ford Bantam. (137 Nm @ 2500 RPM). This means 1992 Holden Commodore will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Bantam. 1992 Holden Commodore has automatic transmission and 2005 Ford Bantam has manual transmission. 2005 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Holden Commodore will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2005 Ford Bantam | 1992 Holden Commodore | |
| Make | Ford | Holden |
| Model | Bantam | Commodore |
| Year Released | 2005 | 1992 |
| Body Type | Pickup | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 3791 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 94 HP | 171 HP |
| Engine RPM | 5500 RPM | 4800 RPM |
| Torque | 137 Nm | 288 Nm |
| Torque RPM | 2500 RPM | 3200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1036 kg | 1395 kg |
| Wheelbase Size | 2620 mm | 2740 mm |
