2005 Ford Bantam vs. 2013 Cadillac CTS

To start off, 2013 Cadillac CTS is newer by 8 year(s). Which means there will be less support and parts availability for 2005 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2005 Ford Bantam would be higher. At 3,000 cc (6 cylinders), 2013 Cadillac CTS is equipped with a bigger engine. In terms of performance, 2013 Cadillac CTS (266 HP @ 7000 RPM) has 172 more horse power than 2005 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2013 Cadillac CTS should accelerate faster than 2005 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac CTS weights approximately 869 kg more than 2005 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Cadillac CTS is all wheel drive (AWD), it will have significant more traction and grip than 2005 Ford Bantam. In wet, icy, snow, or gravel driving conditions, 2013 Cadillac CTS will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac CTS (302 Nm @ 5700 RPM) has 165 more torque (in Nm) than 2005 Ford Bantam. (137 Nm @ 2500 RPM). This means 2013 Cadillac CTS will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Bantam. 2013 Cadillac CTS has automatic transmission and 2005 Ford Bantam has manual transmission. 2005 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac CTS will be easier to drive especially in heavy traffic.

Compare all specifications:

2005 Ford Bantam 2013 Cadillac CTS
Make Ford Cadillac
Model Bantam CTS
Year Released 2005 2013
Body Type Pickup Station Wagon
Engine Position Front Front
Engine Size 1597 cc 3000 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 94 HP 266 HP
Engine RPM 5500 RPM 7000 RPM
Torque 137 Nm 302 Nm
Torque RPM 2500 RPM 5700 RPM
Engine Bore Size 82 mm 89 mm
Engine Stroke Size 75.5 mm 80 mm
Engine Compression Ratio 9.5:1 11.7
Fuel Type Gasoline Gasoline
Drive Type Front AWD
Transmission Type Manual 6-speed automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1036 kg 1905 kg
Wheelbase Size 2620 mm 2880 mm
Fuel Tank Capacity 54 L 68 L