2005 Ford Falcon vs. 2010 Mazda 6

To start off, 2010 Mazda 6 is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Ford Falcon. In addition, the cost of maintenance, including insurance, on 2005 Ford Falcon would be higher. At 3,984 cc (6 cylinders), 2005 Ford Falcon is equipped with a bigger engine. In terms of performance, 2005 Ford Falcon (200 HP @ 4900 RPM) has 30 more horse power than 2010 Mazda 6. (170 HP @ 6000 RPM). In normal driving conditions, 2005 Ford Falcon should accelerate faster than 2010 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Falcon weights approximately 103 kg more than 2010 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Ford Falcon is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Ford Falcon. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Ford Falcon (357 Nm @ 3000 RPM) has 131 more torque (in Nm) than 2010 Mazda 6. (226 Nm @ 4000 RPM). This means 2005 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 6. 2005 Ford Falcon has automatic transmission and 2010 Mazda 6 has manual transmission. 2010 Mazda 6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Ford Falcon will be easier to drive especially in heavy traffic.

Compare all specifications:

2005 Ford Falcon 2010 Mazda 6
Make Ford Mazda
Model Falcon 6
Year Released 2005 2010
Body Type Station Wagon Sedan
Engine Position Front Front
Engine Size 3984 cc 2500 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 170 HP
Engine RPM 4900 RPM 6000 RPM
Torque 357 Nm 226 Nm
Torque RPM 3000 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1581 kg 1478 kg
Wheelbase Size 2930 mm 2789 mm
Fuel Tank Capacity 70 L 70 L