2005 Ford Fusion vs. 1966 Mercury Cyclone
To start off, 2005 Ford Fusion is newer by 39 year(s). Which means there will be less support and parts availability for 1966 Mercury Cyclone. In addition, the cost of maintenance, including insurance, on 1966 Mercury Cyclone would be higher. At 6,393 cc (8 cylinders), 1966 Mercury Cyclone is equipped with a bigger engine. In terms of performance, 1966 Mercury Cyclone (335 HP @ 4800 RPM) has 268 more horse power than 2005 Ford Fusion. (67 HP @ 4000 RPM) In normal driving conditions, 1966 Mercury Cyclone should accelerate faster than 2005 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 1966 Mercury Cyclone weights approximately 455 kg more than 2005 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1966 Mercury Cyclone is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Mercury Cyclone. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Mercury Cyclone (579 Nm @ 3200 RPM) has 419 more torque (in Nm) than 2005 Ford Fusion. (160 Nm @ 2000 RPM). This means 1966 Mercury Cyclone will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Fusion. 1966 Mercury Cyclone has automatic transmission and 2005 Ford Fusion has manual transmission. 2005 Ford Fusion will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Mercury Cyclone will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Ford Fusion | 1966 Mercury Cyclone | |
Make | Ford | Mercury |
Model | Fusion | Cyclone |
Year Released | 2005 | 1966 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 1388 cc | 6393 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 67 HP | 335 HP |
Engine RPM | 4000 RPM | 4800 RPM |
Torque | 160 Nm | 579 Nm |
Torque RPM | 2000 RPM | 3200 RPM |
Engine Bore Size | 73.7 mm | 103 mm |
Engine Stroke Size | 82 mm | 96 mm |
Engine Compression Ratio | 18.0:1 | 10.5:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 1177 kg | 1632 kg |
Vehicle Length | 4020 mm | 4980 mm |
Vehicle Width | 1710 mm | 1880 mm |
Vehicle Height | 1500 mm | 1400 mm |
Wheelbase Size | 2500 mm | 2950 mm |