2005 Ford Ranger vs. 1980 Steyr G-series
To start off, 2005 Ford Ranger is newer by 25 year(s). Which means there will be less support and parts availability for 1980 Steyr G-series. In addition, the cost of maintenance, including insurance, on 1980 Steyr G-series would be higher. At 2,746 cc (6 cylinders), 1980 Steyr G-series is equipped with a bigger engine. In terms of performance, 1980 Steyr G-series (148 HP @ 5250 RPM) has 40 more horse power than 2005 Ford Ranger. (108 HP @ 3500 RPM) In normal driving conditions, 1980 Steyr G-series should accelerate faster than 2005 Ford Ranger. With that said, vehicle weight also plays an important factor in acceleration. 1980 Steyr G-series weights approximately 792 kg more than 2005 Ford Ranger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Ford Ranger (262 Nm @ 2000 RPM) has 36 more torque (in Nm) than 1980 Steyr G-series. (226 Nm @ 4250 RPM). This means 2005 Ford Ranger will have an easier job in driving up hills or pulling heavy equipment than 1980 Steyr G-series.
Compare all specifications:
2005 Ford Ranger | 1980 Steyr G-series | |
Make | Ford | Steyr |
Model | Ranger | G-series |
Year Released | 2005 | 1980 |
Engine Size | 2499 cc | 2746 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 108 HP | 148 HP |
Engine RPM | 3500 RPM | 5250 RPM |
Torque | 262 Nm | 226 Nm |
Torque RPM | 2000 RPM | 4250 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1208 kg | 2000 kg |
Vehicle Length | 5090 mm | 4240 mm |
Wheelbase Size | 3010 mm | 2410 mm |