2005 Isuzu Ascender vs. 1967 Mercury Montclair

To start off, 2005 Isuzu Ascender is newer by 38 year(s). Which means there will be less support and parts availability for 1967 Mercury Montclair. In addition, the cost of maintenance, including insurance, on 1967 Mercury Montclair would be higher. At 6,393 cc (8 cylinders), 1967 Mercury Montclair is equipped with a bigger engine. In terms of performance, 2005 Isuzu Ascender (275 HP) has 8 more horse power than 1967 Mercury Montclair. (267 HP). In normal driving conditions, 2005 Isuzu Ascender should accelerate faster than 1967 Mercury Montclair. With that said, vehicle weight also plays an important factor in acceleration. 2005 Isuzu Ascender weights approximately 724 kg more than 1967 Mercury Montclair. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Isuzu Ascender is four wheel drive (4WD), it will have significant more traction and grip than 1967 Mercury Montclair. In wet, icy, snow, or gravel driving conditions, 2005 Isuzu Ascender will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Mercury Montclair (546 Nm) has 173 more torque (in Nm) than 2005 Isuzu Ascender. (373 Nm). This means 1967 Mercury Montclair will have an easier job in driving up hills or pulling heavy equipment than 2005 Isuzu Ascender.

Compare all specifications:

2005 Isuzu Ascender 1967 Mercury Montclair
Make Isuzu Mercury
Model Ascender Montclair
Year Released 2005 1967
Engine Position Front Front
Engine Size 4195 cc 6393 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 275 HP 267 HP
Torque 373 Nm 546 Nm
Drive Type 4WD Rear
Vehicle Weight 2084 kg 1360 kg
Vehicle Length 4870 mm 5560 mm
Vehicle Width 1940 mm 1990 mm
Vehicle Height 1830 mm 1410 mm
Wheelbase Size 2880 mm 3130 mm