2005 MCC Crossblade vs. 1985 Porsche 928
To start off, 2005 MCC Crossblade is newer by 20 year(s). Which means there will be less support and parts availability for 1985 Porsche 928. In addition, the cost of maintenance, including insurance, on 1985 Porsche 928 would be higher. At 4,664 cc (8 cylinders), 1985 Porsche 928 is equipped with a bigger engine. In terms of performance, 1985 Porsche 928 (310 HP) has 240 more horse power than 2005 MCC Crossblade. (70 HP) In normal driving conditions, 1985 Porsche 928 should accelerate faster than 2005 MCC Crossblade. With that said, vehicle weight also plays an important factor in acceleration. 1985 Porsche 928 weights approximately 810 kg more than 2005 MCC Crossblade. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Porsche 928 (400 Nm @ 4500 RPM) has 298 more torque (in Nm) than 2005 MCC Crossblade. (102 Nm @ 3210 RPM). This means 1985 Porsche 928 will have an easier job in driving up hills or pulling heavy equipment than 2005 MCC Crossblade.
Compare all specifications:
2005 MCC Crossblade | 1985 Porsche 928 | |
Make | MCC | Porsche |
Model | Crossblade | 928 |
Year Released | 2005 | 1985 |
Engine Size | 599 cc | 4664 cc |
Engine Cylinders | 3 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 70 HP | 310 HP |
Torque | 102 Nm | 400 Nm |
Torque RPM | 3210 RPM | 4500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 744 kg | 1554 kg |
Vehicle Length | 2630 mm | 4450 mm |
Vehicle Width | 1630 mm | 1840 mm |
Vehicle Height | 1520 mm | 1290 mm |
Wheelbase Size | 1810 mm | 2510 mm |