2005 Mercedes-Benz CLK vs. 1961 MG MGA

To start off, 2005 Mercedes-Benz CLK is newer by 44 year(s). Which means there will be less support and parts availability for 1961 MG MGA. In addition, the cost of maintenance, including insurance, on 1961 MG MGA would be higher. At 3,196 cc (6 cylinders), 2005 Mercedes-Benz CLK is equipped with a bigger engine. In terms of performance, 2005 Mercedes-Benz CLK (215 HP @ 4200 RPM) has 126 more horse power than 1961 MG MGA. (89 HP @ 5400 RPM). In normal driving conditions, 2005 Mercedes-Benz CLK should accelerate faster than 1961 MG MGA. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mercedes-Benz CLK weights approximately 816 kg more than 1961 MG MGA. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mercedes-Benz CLK (311 Nm) has 162 more torque (in Nm) than 1961 MG MGA. (149 Nm). This means 2005 Mercedes-Benz CLK will have an easier job in driving up hills or pulling heavy equipment than 1961 MG MGA.

Compare all specifications:

2005 Mercedes-Benz CLK 1961 MG MGA
Make Mercedes-Benz MG
Model CLK MGA
Year Released 2005 1961
Body Type Convertible Convertible
Engine Position Front Front
Engine Size 3196 cc 1798 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 3 valves 2 valves
Horse Power 215 HP 89 HP
Engine RPM 4200 RPM 5400 RPM
Torque 311 Nm 149 Nm
Drive Type Rear Rear
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1716 kg 900 kg
Vehicle Length 4640 mm 3970 mm
Vehicle Width 1750 mm 1460 mm
Vehicle Height 1390 mm 1280 mm
Wheelbase Size 2860 mm 2390 mm