2005 Seat Inca Kombi vs. 2010 Alfa Romeo Brera

To start off, 2010 Alfa Romeo Brera is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Seat Inca Kombi. In addition, the cost of maintenance, including insurance, on 2005 Seat Inca Kombi would be higher. At 2,387 cc (5 cylinders), 2010 Alfa Romeo Brera is equipped with a bigger engine. In terms of performance, 2010 Alfa Romeo Brera (197 HP @ 4000 RPM) has 138 more horse power than 2005 Seat Inca Kombi. (59 HP @ 5200 RPM) In normal driving conditions, 2010 Alfa Romeo Brera should accelerate faster than 2005 Seat Inca Kombi. With that said, vehicle weight also plays an important factor in acceleration. 2010 Alfa Romeo Brera weights approximately 640 kg more than 2005 Seat Inca Kombi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alfa Romeo Brera (400 Nm @ 2000 RPM) has 293 more torque (in Nm) than 2005 Seat Inca Kombi. (107 Nm @ 2400 RPM). This means 2010 Alfa Romeo Brera will have an easier job in driving up hills or pulling heavy equipment than 2005 Seat Inca Kombi.

Compare all specifications:

2005 Seat Inca Kombi 2010 Alfa Romeo Brera
Make Seat Alfa Romeo
Model Inca Kombi Brera
Year Released 2005 2010
Engine Position Front Front
Engine Size 1391 cc 2387 cc
Engine Cylinders 4 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 59 HP 197 HP
Engine RPM 5200 RPM 4000 RPM
Torque 107 Nm 400 Nm
Torque RPM 2400 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Vehicle Weight 1035 kg 1675 kg
Vehicle Width 1650 mm 1840 mm