2006 Aston Martin V12 vs. 2002 Chrysler Sebring
To start off, 2006 Aston Martin V12 is newer by 4 year(s). Which means there will be less support and parts availability for 2002 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2002 Chrysler Sebring would be higher. At 5,935 cc (12 cylinders), 2006 Aston Martin V12 is equipped with a bigger engine. In terms of performance, 2006 Aston Martin V12 (521 HP @ 7000 RPM) has 372 more horse power than 2002 Chrysler Sebring. (149 HP @ 5200 RPM). In normal driving conditions, 2006 Aston Martin V12 should accelerate faster than 2002 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2006 Aston Martin V12 weights approximately 426 kg more than 2002 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Aston Martin V12 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Aston Martin V12. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Aston Martin V12 (577 Nm @ 5800 RPM) has 351 more torque (in Nm) than 2002 Chrysler Sebring. (226 Nm @ 4000 RPM). This means 2006 Aston Martin V12 will have an easier job in driving up hills or pulling heavy equipment than 2002 Chrysler Sebring. 2002 Chrysler Sebring has automatic transmission and 2006 Aston Martin V12 has manual transmission. 2006 Aston Martin V12 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Aston Martin V12 | 2002 Chrysler Sebring | |
| Make | Aston Martin | Chrysler |
| Model | V12 | Sebring |
| Year Released | 2006 | 2002 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 5935 cc | 2343 cc |
| Engine Cylinders | 12 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 521 HP | 149 HP |
| Engine RPM | 7000 RPM | 5200 RPM |
| Torque | 577 Nm | 226 Nm |
| Torque RPM | 5800 RPM | 4000 RPM |
| Engine Bore Size | 89 mm | 87.4 mm |
| Engine Stroke Size | 79.5 mm | 101 mm |
| Engine Compression Ratio | 10.8:1 | 9.4:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1878 kg | 1452 kg |
| Vehicle Length | 4670 mm | 4850 mm |
| Vehicle Width | 1930 mm | 1800 mm |
| Vehicle Height | 1320 mm | 1400 mm |
| Wheelbase Size | 2700 mm | 2880 mm |
| Fuel Tank Capacity | 80 L | 61 L |
