2006 Bentley Arnage vs. 2010 Hyundai i10
To start off, 2010 Hyundai i10 is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Bentley Arnage. In addition, the cost of maintenance, including insurance, on 2006 Bentley Arnage would be higher. At 6,750 cc (8 cylinders), 2006 Bentley Arnage is equipped with a bigger engine. In terms of performance, 2006 Bentley Arnage (399 HP @ 4000 RPM) has 325 more horse power than 2010 Hyundai i10. (74 HP @ 4000 RPM). In normal driving conditions, 2006 Bentley Arnage should accelerate faster than 2010 Hyundai i10. With that said, vehicle weight also plays an important factor in acceleration. 2006 Bentley Arnage weights approximately 1471 kg more than 2010 Hyundai i10. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Bentley Arnage is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Bentley Arnage. However, in wet, icy, snow, or gravel driving conditions, 2010 Hyundai i10, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Bentley Arnage (835 Nm @ 3250 RPM) has 682 more torque (in Nm) than 2010 Hyundai i10. (153 Nm @ 1900 RPM). This means 2006 Bentley Arnage will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai i10. 2006 Bentley Arnage has automatic transmission and 2010 Hyundai i10 has manual transmission. 2010 Hyundai i10 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Bentley Arnage will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Bentley Arnage | 2010 Hyundai i10 | |
| Make | Bentley | Hyundai |
| Model | Arnage | i10 |
| Year Released | 2006 | 2010 |
| Body Type | Sedan | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 6750 cc | 1120 cc |
| Engine Cylinders | 8 cylinders | 3 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 399 HP | 74 HP |
| Engine RPM | 4000 RPM | 4000 RPM |
| Torque | 835 Nm | 153 Nm |
| Torque RPM | 3250 RPM | 1900 RPM |
| Engine Bore Size | 104.2 mm | 75 mm |
| Engine Stroke Size | 99.1 mm | 84.5 mm |
| Engine Compression Ratio | 8.0:1 | 17.8:1 |
| Fuel Type | Gasoline - Premium | Diesel |
| Top Speed | 250 km/hour | 163 km/hour |
| Acceleration 0-100mph | 6.3 seconds | 16.1 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 2586 kg | 1115 kg |
| Vehicle Length | 5400 mm | 3570 mm |
| Vehicle Width | 1940 mm | 1600 mm |
| Vehicle Height | 1520 mm | 1550 mm |
| Wheelbase Size | 3120 mm | 2390 mm |
| Fuel Consumption Overall | 19.2 L/100km | 4.3 L/100km |
| Fuel Tank Capacity | 100 L | 35 L |
