2006 BMW 330 vs. 1950 Holden FX

To start off, 2006 BMW 330 is newer by 56 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,979 cc (6 cylinders), 2006 BMW 330 is equipped with a bigger engine. In terms of performance, 2006 BMW 330 (225 HP) has 174 more horse power than 1950 Holden FX. (51 HP). In normal driving conditions, 2006 BMW 330 should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 2006 BMW 330 weights approximately 536 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 BMW 330 (290 Nm @ 3500 RPM) has 154 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 2006 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.

Compare all specifications:

2006 BMW 330 1950 Holden FX
Make BMW Holden
Model 330 FX
Year Released 2006 1950
Engine Position Front Front
Engine Size 2979 cc 2165 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 225 HP 51 HP
Torque 290 Nm 136 Nm
Torque RPM 3500 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1506 kg 970 kg
Vehicle Length 4490 mm 4380 mm
Vehicle Width 1950 mm 1710 mm
Vehicle Height 1380 mm 1580 mm
Wheelbase Size 2730 mm 2620 mm