2006 Chevrolet Colorado vs. 1980 Ferrari Mondial
To start off, 2006 Chevrolet Colorado is newer by 26 year(s). Which means there will be less support and parts availability for 1980 Ferrari Mondial. In addition, the cost of maintenance, including insurance, on 1980 Ferrari Mondial would be higher. At 2,927 cc (8 cylinders), 1980 Ferrari Mondial is equipped with a bigger engine. In terms of performance, 1980 Ferrari Mondial (214 HP @ 6600 RPM) has 41 more horse power than 2006 Chevrolet Colorado. (173 HP @ 5600 RPM) In normal driving conditions, 1980 Ferrari Mondial should accelerate faster than 2006 Chevrolet Colorado.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Chevrolet Colorado (251 Nm @ 2800 RPM) has 8 more torque (in Nm) than 1980 Ferrari Mondial. (243 Nm @ 4600 RPM). This means 2006 Chevrolet Colorado will have an easier job in driving up hills or pulling heavy equipment than 1980 Ferrari Mondial.
Compare all specifications:
2006 Chevrolet Colorado | 1980 Ferrari Mondial | |
Make | Chevrolet | Ferrari |
Model | Colorado | Mondial |
Year Released | 2006 | 1980 |
Body Type | Pickup | Coupe |
Engine Position | Front | Middle |
Engine Size | 2770 cc | 2927 cc |
Horse Power | 173 HP | 214 HP |
Engine RPM | 5600 RPM | 6600 RPM |
Torque | 251 Nm | 243 Nm |
Torque RPM | 2800 RPM | 4600 RPM |
Engine Bore Size | 93 mm | 81.1 mm |
Engine Stroke Size | 101.6 mm | 71 mm |
Engine Compression Ratio | 10.0:1 | 8.8:1 |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 6 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Length | 5270 mm | 4650 mm |
Vehicle Width | 1750 mm | 1800 mm |
Vehicle Height | 1700 mm | 1270 mm |
Wheelbase Size | 3200 mm | 2710 mm |