2006 Chrysler Pacifica vs. 1962 Lancia Appia
To start off, 2006 Chrysler Pacifica is newer by 44 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 3,523 cc (6 cylinders), 2006 Chrysler Pacifica is equipped with a bigger engine. In terms of performance, 2006 Chrysler Pacifica (250 HP @ 6400 RPM) has 203 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM). In normal driving conditions, 2006 Chrysler Pacifica should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2006 Chrysler Pacifica weights approximately 1124 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2006 Chrysler Pacifica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Chrysler Pacifica (339 Nm @ 3950 RPM) has 262 more torque (in Nm) than 1962 Lancia Appia. (77 Nm @ 3000 RPM). This means 2006 Chrysler Pacifica will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2006 Chrysler Pacifica has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Chrysler Pacifica will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Chrysler Pacifica | 1962 Lancia Appia | |
Make | Chrysler | Lancia |
Model | Pacifica | Appia |
Year Released | 2006 | 1962 |
Engine Position | Front | Front |
Engine Size | 3523 cc | 1089 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 250 HP | 47 HP |
Engine RPM | 6400 RPM | 4800 RPM |
Torque | 339 Nm | 77 Nm |
Torque RPM | 3950 RPM | 3000 RPM |
Engine Compression Ratio | 9.9:1 | 8.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 2024 kg | 900 kg |
Vehicle Length | 5060 mm | 4020 mm |
Vehicle Width | 2020 mm | 1490 mm |
Vehicle Height | 1700 mm | 1410 mm |
Wheelbase Size | 2960 mm | 2520 mm |
Fuel Consumption Overall | 11.1 L/100km | 10.1 L/100km |
Fuel Tank Capacity | 87 L | 37 L |