2006 Dodge Viper vs. 1976 Holden Sunbird

To start off, 2006 Dodge Viper is newer by 30 year(s). Which means there will be less support and parts availability for 1976 Holden Sunbird. In addition, the cost of maintenance, including insurance, on 1976 Holden Sunbird would be higher. At 8,274 cc (10 cylinders), 2006 Dodge Viper is equipped with a bigger engine. In terms of performance, 2006 Dodge Viper (510 HP @ 5600 RPM) has 263 more horse power than 1976 Holden Sunbird. (247 HP @ 5000 RPM). In normal driving conditions, 2006 Dodge Viper should accelerate faster than 1976 Holden Sunbird. With that said, vehicle weight also plays an important factor in acceleration. 2006 Dodge Viper weights approximately 243 kg more than 1976 Holden Sunbird. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Dodge Viper (725 Nm @ 4200 RPM) has 289 more torque (in Nm) than 1976 Holden Sunbird. (436 Nm @ 3400 RPM). This means 2006 Dodge Viper will have an easier job in driving up hills or pulling heavy equipment than 1976 Holden Sunbird.

Compare all specifications:

2006 Dodge Viper 1976 Holden Sunbird
Make Dodge Holden
Model Viper Sunbird
Year Released 2006 1976
Engine Position Front Front
Engine Size 8274 cc 5044 cc
Engine Cylinders 10 cylinders 8 cylinders
Engine Type V in-line
Horse Power 510 HP 247 HP
Engine RPM 5600 RPM 5000 RPM
Torque 725 Nm 436 Nm
Torque RPM 4200 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1523 kg 1280 kg
Vehicle Length 4470 mm 4500 mm
Vehicle Width 1920 mm 1710 mm
Vehicle Height 1220 mm 1340 mm
Wheelbase Size 2520 mm 2590 mm