2006 Fiat Grande Punto vs. 1987 Toyota Crown

To start off, 2006 Fiat Grande Punto is newer by 19 year(s). Which means there will be less support and parts availability for 1987 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1987 Toyota Crown would be higher. At 2,954 cc (6 cylinders), 1987 Toyota Crown is equipped with a bigger engine. In terms of performance, 1987 Toyota Crown (190 HP @ 5600 RPM) has 71 more horse power than 2006 Fiat Grande Punto. (119 HP @ 4000 RPM) In normal driving conditions, 1987 Toyota Crown should accelerate faster than 2006 Fiat Grande Punto. With that said, vehicle weight also plays an important factor in acceleration. 2006 Fiat Grande Punto weights approximately 200 kg more than 1987 Toyota Crown.

Because 1987 Toyota Crown is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1987 Toyota Crown. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Grande Punto, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Fiat Grande Punto (280 Nm @ 2000 RPM) has 25 more torque (in Nm) than 1987 Toyota Crown. (255 Nm @ 3600 RPM). This means 2006 Fiat Grande Punto will have an easier job in driving up hills or pulling heavy equipment than 1987 Toyota Crown. 1987 Toyota Crown has automatic transmission and 2006 Fiat Grande Punto has manual transmission. 2006 Fiat Grande Punto will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1987 Toyota Crown will be easier to drive especially in heavy traffic.

Compare all specifications:

2006 Fiat Grande Punto 1987 Toyota Crown
Make Fiat Toyota
Model Grande Punto Crown
Year Released 2006 1987
Body Type Hatchback Sedan
Engine Position Front Front
Engine Size 1910 cc 2954 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 119 HP 190 HP
Engine RPM 4000 RPM 5600 RPM
Torque 280 Nm 255 Nm
Torque RPM 2000 RPM 3600 RPM
Engine Bore Size 82 mm 83 mm
Engine Stroke Size 90.4 mm 91 mm
Engine Compression Ratio 18.0:1 10.0:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1280 kg 1080 kg
Vehicle Length 4040 mm 4870 mm
Vehicle Width 1690 mm 1730 mm
Vehicle Height 1500 mm 1430 mm
Wheelbase Size 2520 mm 2730 mm