2006 Fiat Palio II vs. 2005 Chevrolet Blazer
To start off, 2006 Fiat Palio II is newer by 1 year(s). Which means there will be less support and parts availability for 2005 Chevrolet Blazer. In addition, the cost of maintenance, including insurance, on 2005 Chevrolet Blazer would be higher. At 4,299 cc (6 cylinders), 2005 Chevrolet Blazer is equipped with a bigger engine. In terms of performance, 2005 Chevrolet Blazer (190 HP @ 4400 RPM) has 122 more horse power than 2006 Fiat Palio II. (68 HP @ 4600 RPM) In normal driving conditions, 2005 Chevrolet Blazer should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chevrolet Blazer weights approximately 475 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Chevrolet Blazer is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Chevrolet Blazer. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Chevrolet Blazer (339 Nm @ 2800 RPM) has 204 more torque (in Nm) than 2006 Fiat Palio II. (135 Nm @ 2400 RPM). This means 2005 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2005 Chevrolet Blazer has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chevrolet Blazer will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Fiat Palio II | 2005 Chevrolet Blazer | |
Make | Fiat | Chevrolet |
Model | Palio II | Blazer |
Year Released | 2006 | 2005 |
Engine Position | Front | Front |
Engine Size | 1697 cc | 4299 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 68 HP | 190 HP |
Engine RPM | 4600 RPM | 4400 RPM |
Torque | 135 Nm | 339 Nm |
Torque RPM | 2400 RPM | 2800 RPM |
Engine Bore Size | 82.6 mm | 101.6 mm |
Engine Stroke Size | 79.2 mm | 88.4 mm |
Engine Compression Ratio | 20.3:1 | 9.2:1 |
Fuel Type | Diesel | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1325 kg | 1800 kg |
Vehicle Length | 4730 mm | 4660 mm |
Vehicle Height | 1700 mm | 1640 mm |
Wheelbase Size | 2550 mm | 2720 mm |