2006 Fiat Palio II vs. 2007 Mercury Grand Marquis
To start off, 2007 Mercury Grand Marquis is newer by 1 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 4,603 cc (8 cylinders), 2007 Mercury Grand Marquis is equipped with a bigger engine. In terms of performance, 2007 Mercury Grand Marquis (239 HP @ 4900 RPM) has 139 more horse power than 2006 Fiat Palio II. (100 HP @ 5500 RPM) In normal driving conditions, 2007 Mercury Grand Marquis should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2007 Mercury Grand Marquis weights approximately 287 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2007 Mercury Grand Marquis is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2007 Mercury Grand Marquis. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Mercury Grand Marquis (389 Nm @ 4100 RPM) has 249 more torque (in Nm) than 2006 Fiat Palio II. (140 Nm @ 4000 RPM). This means 2007 Mercury Grand Marquis will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2007 Mercury Grand Marquis has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Mercury Grand Marquis will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Fiat Palio II | 2007 Mercury Grand Marquis | |
| Make | Fiat | Mercury |
| Model | Palio II | Grand Marquis |
| Year Released | 2006 | 2007 |
| Engine Position | Front | Front |
| Engine Size | 1580 cc | 4603 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 100 HP | 239 HP |
| Engine RPM | 5500 RPM | 4900 RPM |
| Torque | 140 Nm | 389 Nm |
| Torque RPM | 4000 RPM | 4100 RPM |
| Engine Bore Size | 86.4 mm | 90.2 mm |
| Engine Stroke Size | 67.4 mm | 89.9 mm |
| Engine Compression Ratio | 9.5:1 | 9.4:1 |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Weight | 1545 kg | 1832 kg |
| Vehicle Length | 3830 mm | 5370 mm |
| Vehicle Width | 1640 mm | 2000 mm |
| Vehicle Height | 1440 mm | 1490 mm |
| Wheelbase Size | 2380 mm | 2920 mm |
| Fuel Consumption Overall | 8 L/100km | 11.8 L/100km |
| Fuel Tank Capacity | 54 L | 72 L |
