2006 Fiat Palio II vs. 2008 GMC Acadia

To start off, 2008 GMC Acadia is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (276 HP @ 6600 RPM) has 204 more horse power than 2006 Fiat Palio II. (72 HP @ 6000 RPM) In normal driving conditions, 2008 GMC Acadia should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Acadia weights approximately 766 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 238 more torque (in Nm) than 2006 Fiat Palio II. (102 Nm @ 3250 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2008 GMC Acadia has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

2006 Fiat Palio II 2008 GMC Acadia
Make Fiat GMC
Model Palio II Acadia
Year Released 2006 2008
Engine Position Front Front
Engine Size 1242 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 72 HP 276 HP
Engine RPM 6000 RPM 6600 RPM
Torque 102 Nm 340 Nm
Torque RPM 3250 RPM 3200 RPM
Engine Compression Ratio 9.1:1 10.2:1
Drive Type Front Front
Transmission Type Manual Automatic
Number of Seats 4 seats 8 seats
Number of Doors 3 doors 5 doors
Vehicle Weight 1375 kg 2141 kg
Vehicle Length 3830 mm 5110 mm
Vehicle Width 1640 mm 2010 mm
Vehicle Height 1440 mm 1860 mm
Wheelbase Size 2380 mm 3030 mm
Fuel Consumption Overall 7.8 L/100km 12.4 L/100km
Fuel Tank Capacity 54 L 83 L