2006 Fiat Palio II vs. 2010 Chevrolet Silverado
To start off, 2010 Chevrolet Silverado is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 5,300 cc (8 cylinders), 2010 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Silverado (315 HP @ 5200 RPM) has 243 more horse power than 2006 Fiat Palio II. (72 HP @ 6000 RPM) In normal driving conditions, 2010 Chevrolet Silverado should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Silverado weights approximately 535 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Chevrolet Silverado is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Chevrolet Silverado. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Silverado (454 Nm @ 4000 RPM) has 352 more torque (in Nm) than 2006 Fiat Palio II. (102 Nm @ 3250 RPM). This means 2010 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2010 Chevrolet Silverado has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Silverado will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Fiat Palio II | 2010 Chevrolet Silverado | |
| Make | Fiat | Chevrolet |
| Model | Palio II | Silverado |
| Year Released | 2006 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1241 cc | 5300 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 72 HP | 315 HP |
| Engine RPM | 6000 RPM | 5200 RPM |
| Torque | 102 Nm | 454 Nm |
| Torque RPM | 3250 RPM | 4000 RPM |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Vehicle Weight | 1783 kg | 2318 kg |
| Vehicle Length | 3830 mm | 5847 mm |
| Vehicle Width | 1640 mm | 2032 mm |
| Vehicle Height | 1440 mm | 1875 mm |
| Wheelbase Size | 2380 mm | 3645 mm |
| Fuel Tank Capacity | 54 L | 98 L |
