2006 Fiat Palio II vs. 2010 Chevrolet Silverado
To start off, 2010 Chevrolet Silverado is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 4,300 cc (6 cylinders), 2010 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Silverado (195 HP @ 4600 RPM) has 123 more horse power than 2006 Fiat Palio II. (72 HP @ 6000 RPM) In normal driving conditions, 2010 Chevrolet Silverado should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2006 Fiat Palio II weights approximately 234 kg more than 2010 Chevrolet Silverado.
Because 2010 Chevrolet Silverado is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Chevrolet Silverado. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Silverado (353 Nm @ 2800 RPM) has 251 more torque (in Nm) than 2006 Fiat Palio II. (102 Nm @ 3250 RPM). This means 2010 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2010 Chevrolet Silverado has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Silverado will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Fiat Palio II | 2010 Chevrolet Silverado | |
| Make | Fiat | Chevrolet |
| Model | Palio II | Silverado |
| Year Released | 2006 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1241 cc | 4300 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 72 HP | 195 HP |
| Engine RPM | 6000 RPM | 4600 RPM |
| Torque | 102 Nm | 353 Nm |
| Torque RPM | 3250 RPM | 2800 RPM |
| Engine Compression Ratio | 9.1:1 | 9.1:1 |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 3 seats |
| Number of Doors | 3 doors | 4 doors |
| Vehicle Weight | 1783 kg | 1549 kg |
| Vehicle Length | 3830 mm | 5710 mm |
| Vehicle Width | 1640 mm | 2040 mm |
| Vehicle Height | 1440 mm | 1870 mm |
| Wheelbase Size | 2380 mm | 3380 mm |
| Fuel Consumption Overall | 7.8 L/100km | 14 L/100km |
| Fuel Tank Capacity | 54 L | 129 L |
