2006 Fiat Palio II vs. 2010 Fiat Fiorino

To start off, 2010 Fiat Fiorino is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 1,360 cc (4 cylinders), 2010 Fiat Fiorino is equipped with a bigger engine. In terms of performance, both vehicles can yield 72 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Fiorino (119 Nm @ 2600 RPM) has 16 more torque (in Nm) than 2006 Fiat Palio II. (103 Nm @ 3250 RPM). This means 2010 Fiat Fiorino will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II.

Compare all specifications:

2006 Fiat Palio II 2010 Fiat Fiorino
Make Fiat Fiat
Model Palio II Fiorino
Year Released 2006 2010
Engine Position Front Front
Engine Size 1242 cc 1360 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 72 HP 72 HP
Engine RPM 6000 RPM 5200 RPM
Torque 103 Nm 119 Nm
Torque RPM 3250 RPM 2600 RPM
Engine Bore Size 70.8 mm 75 mm
Engine Stroke Size 78.8 mm 77 mm
Top Speed 164 km/hour 157 km/hour
Acceleration 0-100mph 13.5 seconds 15 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 2 seats
Number of Doors 3 doors 3 doors
Vehicle Length 3830 mm 3870 mm
Vehicle Width 1640 mm 1720 mm
Vehicle Height 1440 mm 1730 mm
Wheelbase Size 2380 mm 2520 mm
Fuel Consumption Overall 7.8 L/100km 6.9 L/100km
Fuel Tank Capacity 54 L 45 L