2006 Fiat Palio II vs. 2013 BMW 3 Series

To start off, 2013 BMW 3 Series is newer by 7 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 2,979 cc (6 cylinders), 2013 BMW 3 Series is equipped with a bigger engine. In terms of performance, 2013 BMW 3 Series (238 HP @ 5800 RPM) has 166 more horse power than 2006 Fiat Palio II. (72 HP @ 6000 RPM) In normal driving conditions, 2013 BMW 3 Series should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2013 BMW 3 Series weights approximately 255 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 BMW 3 Series is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 BMW 3 Series. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 BMW 3 Series (407 Nm @ 5000 RPM) has 305 more torque (in Nm) than 2006 Fiat Palio II. (102 Nm @ 3250 RPM). This means 2013 BMW 3 Series will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2013 BMW 3 Series has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 BMW 3 Series will be easier to drive especially in heavy traffic.

Compare all specifications:

2006 Fiat Palio II 2013 BMW 3 Series
Make Fiat BMW
Model Palio II 3 Series
Year Released 2006 2013
Engine Position Front Front
Engine Size 1242 cc 2979 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 72 HP 238 HP
Engine RPM 6000 RPM 5800 RPM
Torque 102 Nm 407 Nm
Torque RPM 3250 RPM 5000 RPM
Engine Bore Size 70.9 mm 84 mm
Engine Stroke Size 78.8 mm 89 mm
Engine Compression Ratio 9.1:1 10.2
Drive Type Front Rear
Transmission Type Manual 8-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1375 kg 1630 kg
Vehicle Length 3830 mm 4636 mm
Vehicle Width 1640 mm 2031 mm
Vehicle Height 1440 mm 1429 mm
Wheelbase Size 2380 mm 2810 mm
Fuel Tank Capacity 54 L 60 L