2006 Fiat Palio II vs. 2013 BMW ActiveHybrid 3
To start off, 2013 BMW ActiveHybrid 3 is newer by 7 year(s). Which means there will be less support and parts availability for 2006 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2006 Fiat Palio II would be higher. At 2,979 cc (6 cylinders), 2013 BMW ActiveHybrid 3 is equipped with a bigger engine. In terms of performance, 2013 BMW ActiveHybrid 3 (296 HP @ 5800 RPM) has 228 more horse power than 2006 Fiat Palio II. (68 HP @ 4600 RPM) In normal driving conditions, 2013 BMW ActiveHybrid 3 should accelerate faster than 2006 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2013 BMW ActiveHybrid 3 weights approximately 410 kg more than 2006 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 BMW ActiveHybrid 3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 BMW ActiveHybrid 3. However, in wet, icy, snow, or gravel driving conditions, 2006 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 BMW ActiveHybrid 3 (407 Nm @ 5000 RPM) has 272 more torque (in Nm) than 2006 Fiat Palio II. (135 Nm @ 2400 RPM). This means 2013 BMW ActiveHybrid 3 will have an easier job in driving up hills or pulling heavy equipment than 2006 Fiat Palio II. 2013 BMW ActiveHybrid 3 has automatic transmission and 2006 Fiat Palio II has manual transmission. 2006 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 BMW ActiveHybrid 3 will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Fiat Palio II | 2013 BMW ActiveHybrid 3 | |
Make | Fiat | BMW |
Model | Palio II | ActiveHybrid 3 |
Year Released | 2006 | 2013 |
Engine Position | Front | Front |
Engine Size | 1697 cc | 2979 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 68 HP | 296 HP |
Engine RPM | 4600 RPM | 5800 RPM |
Torque | 135 Nm | 407 Nm |
Torque RPM | 2400 RPM | 5000 RPM |
Engine Bore Size | 82.6 mm | 84 mm |
Engine Stroke Size | 79.2 mm | 89 mm |
Engine Compression Ratio | 20.3:1 | 10.2 |
Fuel Type | Diesel | Gasoline |
Acceleration 0-100mph | 16.3 seconds | 5.2 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | 8-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1325 kg | 1735 kg |
Vehicle Length | 4730 mm | 4636 mm |
Vehicle Height | 1700 mm | 1429 mm |
Wheelbase Size | 2550 mm | 2810 mm |
Fuel Tank Capacity | 47 L | 57 L |