2006 Fiat Stilo vs. 2008 Peugeot 307
To start off, 2008 Peugeot 307 is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Fiat Stilo. In addition, the cost of maintenance, including insurance, on 2006 Fiat Stilo would be higher. At 1,997 cc (4 cylinders), 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 143 kg more than 2006 Fiat Stilo.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 200 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
2006 Fiat Stilo | 2008 Peugeot 307 | |
Make | Fiat | Peugeot |
Model | Stilo | 307 |
Year Released | 2006 | 2008 |
Engine Position | Front | Front |
Engine Size | 1910 cc | 1997 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 99 HP | 0 HP |
Torque | 200 Nm | 200 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Engine Compression Ratio | 19.0:1 | 10.8:1 |
Fuel Type | Diesel | Gasoline |
Top Speed | 172 km/hour | 202 km/hour |
Acceleration 0-100mph | 12.9 seconds | 10.7 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 3 doors | 2 doors |
Vehicle Weight | 1325 kg | 1468 kg |
Vehicle Length | 4190 mm | 4210 mm |
Vehicle Width | 1790 mm | 1740 mm |
Vehicle Height | 1480 mm | 1520 mm |
Wheelbase Size | 2610 mm | 2610 mm |
Fuel Consumption Overall | 5.6 L/100km | 6.2 L/100km |
Fuel Tank Capacity | 58 L | 50 L |