2006 Ford Bantam vs. 2008 Jeep Wrangler
To start off, 2008 Jeep Wrangler is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2006 Ford Bantam would be higher. At 3,966 cc (6 cylinders), 2008 Jeep Wrangler is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2006 Ford Bantam weights approximately 165 kg more than 2008 Jeep Wrangler.
Because 2008 Jeep Wrangler is four wheel drive (4WD), it will have significant more traction and grip than 2006 Ford Bantam. In wet, icy, snow, or gravel driving conditions, 2008 Jeep Wrangler will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Jeep Wrangler (296 Nm @ 3500 RPM) has 186 more torque (in Nm) than 2006 Ford Bantam. (110 Nm @ 2500 RPM). This means 2008 Jeep Wrangler will have an easier job in driving up hills or pulling heavy equipment than 2006 Ford Bantam.
Compare all specifications:
| 2006 Ford Bantam | 2008 Jeep Wrangler | |
| Make | Ford | Jeep |
| Model | Bantam | Wrangler |
| Year Released | 2006 | 2008 |
| Body Type | Pickup | SUV |
| Engine Position | Front | Front |
| Engine Size | 1297 cc | 3966 cc |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 74 HP | 0 HP |
| Torque | 110 Nm | 296 Nm |
| Torque RPM | 2500 RPM | 3500 RPM |
| Engine Compression Ratio | 10.2:1 | 8.8:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | 4WD |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1715 kg | 1550 kg |
| Vehicle Length | 5390 mm | 3950 mm |
| Vehicle Height | 2120 mm | 1810 mm |
| Wheelbase Size | 2670 mm | 2380 mm |
| Fuel Consumption Overall | 11.8 L/100km | 13.1 L/100km |
| Fuel Tank Capacity | 54 L | 72 L |
