2006 Ford Crown Victoria vs. 2012 Fiat 500
To start off, 2012 Fiat 500 is newer by 6 year(s). Which means there will be less support and parts availability for 2006 Ford Crown Victoria. In addition, the cost of maintenance, including insurance, on 2006 Ford Crown Victoria would be higher. At 4,604 cc (8 cylinders), 2006 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2006 Ford Crown Victoria (239 HP @ 4750 RPM) has 171 more horse power than 2012 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 2006 Ford Crown Victoria should accelerate faster than 2012 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2006 Ford Crown Victoria weights approximately 1916 kg more than 2012 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Ford Crown Victoria (374 Nm @ 4000 RPM) has 272 more torque (in Nm) than 2012 Fiat 500. (102 Nm @ 3000 RPM). This means 2006 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat 500. 2006 Ford Crown Victoria has automatic transmission and 2012 Fiat 500 has manual transmission. 2012 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Ford Crown Victoria | 2012 Fiat 500 | |
Make | Ford | Fiat |
Model | Crown Victoria | 500 |
Year Released | 2006 | 2012 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 4604 cc | 1242 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 239 HP | 68 HP |
Engine RPM | 4750 RPM | 5500 RPM |
Torque | 374 Nm | 102 Nm |
Torque RPM | 4000 RPM | 3000 RPM |
Engine Bore Size | 90.2 mm | 70.8 mm |
Engine Stroke Size | 90 mm | 78.9 mm |
Engine Compression Ratio | 9.4:1 | 11.1:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 2856 kg | 940 kg |
Vehicle Length | 5390 mm | 3550 mm |
Vehicle Width | 1970 mm | 1630 mm |
Vehicle Height | 1450 mm | 1490 mm |
Wheelbase Size | 2920 mm | 2310 mm |
Fuel Consumption Overall | 11.8 L/100km | 5.1 L/100km |
Fuel Tank Capacity | 72 L | 35 L |