2006 Ford Fusion vs. 2012 Mercedes-Benz CL

To start off, 2012 Mercedes-Benz CL is newer by 6 year(s). Which means there will be less support and parts availability for 2006 Ford Fusion. In addition, the cost of maintenance, including insurance, on 2006 Ford Fusion would be higher. At 5,500 cc (12 cylinders), 2012 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz CL (510 HP @ 5000 RPM) has 421 more horse power than 2006 Ford Fusion. (89 HP @ 4000 RPM) In normal driving conditions, 2012 Mercedes-Benz CL should accelerate faster than 2006 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz CL weights approximately 1043 kg more than 2006 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2006 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz CL (829 Nm @ 1800 RPM) has 625 more torque (in Nm) than 2006 Ford Fusion. (204 Nm @ 1750 RPM). This means 2012 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2006 Ford Fusion. 2012 Mercedes-Benz CL has automatic transmission and 2006 Ford Fusion has manual transmission. 2006 Ford Fusion will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

2006 Ford Fusion 2012 Mercedes-Benz CL
Make Ford Mercedes-Benz
Model Fusion CL
Year Released 2006 2012
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 1559 cc 5500 cc
Engine Cylinders 4 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 3 valves
Horse Power 89 HP 510 HP
Engine RPM 4000 RPM 5000 RPM
Torque 204 Nm 829 Nm
Torque RPM 1750 RPM 1800 RPM
Fuel Type Diesel Gasoline
Drive Type Front Rear
Transmission Type Manual 5-speed shiftable automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1177 kg 2220 kg
Vehicle Length 4020 mm 5095 mm
Vehicle Width 1730 mm 1872 mm
Vehicle Height 1500 mm 1417 mm
Wheelbase Size 2490 mm 2954 mm
Fuel Tank Capacity 45 L 90 L