2006 GMC Canyon vs. 1971 Holden Monaro
To start off, 2006 GMC Canyon is newer by 35 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 4,141 cc (8 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 2006 GMC Canyon (220 HP @ 5600 RPM) has 38 more horse power than 1971 Holden Monaro. (182 HP @ 4400 RPM). In normal driving conditions, 2006 GMC Canyon should accelerate faster than 1971 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 2006 GMC Canyon weights approximately 1197 kg more than 1971 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 GMC Canyon is four wheel drive (4WD), it will have significant more traction and grip than 1971 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 2006 GMC Canyon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Monaro (356 Nm @ 2400 RPM) has 51 more torque (in Nm) than 2006 GMC Canyon. (305 Nm @ 2800 RPM). This means 1971 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2006 GMC Canyon.
Compare all specifications:
2006 GMC Canyon | 1971 Holden Monaro | |
Make | GMC | Holden |
Model | Canyon | Monaro |
Year Released | 2006 | 1971 |
Engine Position | Front | Front |
Engine Size | 3458 cc | 4141 cc |
Horse Power | 220 HP | 182 HP |
Engine RPM | 5600 RPM | 4400 RPM |
Torque | 305 Nm | 356 Nm |
Torque RPM | 2800 RPM | 2400 RPM |
Drive Type | 4WD | Rear |
Vehicle Weight | 2577 kg | 1380 kg |
Vehicle Length | 5270 mm | 4770 mm |
Vehicle Width | 1720 mm | 1890 mm |
Vehicle Height | 1660 mm | 1360 mm |
Wheelbase Size | 3210 mm | 2830 mm |