2006 GMC Canyon vs. 1971 Holden Monaro
To start off, 2006 GMC Canyon is newer by 35 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 2,834 cc (6 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 2006 GMC Canyon (175 HP @ 5600 RPM) has 59 more horse power than 1971 Holden Monaro. (116 HP @ 4400 RPM). In normal driving conditions, 2006 GMC Canyon should accelerate faster than 1971 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 2006 GMC Canyon weights approximately 1237 kg more than 1971 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 GMC Canyon is four wheel drive (4WD), it will have significant more traction and grip than 1971 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 2006 GMC Canyon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 GMC Canyon (251 Nm @ 2800 RPM) has 23 more torque (in Nm) than 1971 Holden Monaro. (228 Nm @ 2000 RPM). This means 2006 GMC Canyon will have an easier job in driving up hills or pulling heavy equipment than 1971 Holden Monaro.
Compare all specifications:
2006 GMC Canyon | 1971 Holden Monaro | |
Make | GMC | Holden |
Model | Canyon | Monaro |
Year Released | 2006 | 1971 |
Engine Position | Front | Front |
Engine Size | 2770 cc | 2834 cc |
Horse Power | 175 HP | 116 HP |
Engine RPM | 5600 RPM | 4400 RPM |
Torque | 251 Nm | 228 Nm |
Torque RPM | 2800 RPM | 2000 RPM |
Drive Type | 4WD | Rear |
Vehicle Weight | 2577 kg | 1340 kg |
Vehicle Length | 5270 mm | 4770 mm |
Vehicle Width | 1750 mm | 1890 mm |
Vehicle Height | 1730 mm | 1360 mm |
Wheelbase Size | 3210 mm | 2830 mm |