2006 Holden Barina vs. 2006 Toyota MR2
To start off, both 2006 Holden Barina and 2006 Toyota MR2 were released in the same year (2006). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,792 cc (4 cylinders), 2006 Toyota MR2 is equipped with a bigger engine.
Because 2006 Toyota MR2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Toyota MR2. However, in wet, icy, snow, or gravel driving conditions, 2006 Holden Barina, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Holden Barina (197 Nm @ 3600 RPM) has 27 more torque (in Nm) than 2006 Toyota MR2. (170 Nm @ 4400 RPM). This means 2006 Holden Barina will have an easier job in driving up hills or pulling heavy equipment than 2006 Toyota MR2.
Compare all specifications:
2006 Holden Barina | 2006 Toyota MR2 | |
Make | Holden | Toyota |
Model | Barina | MR2 |
Year Released | 2006 | 2006 |
Body Type | Hatchback | Convertible |
Engine Position | Front | Middle |
Engine Size | 1598 cc | 1792 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 0 HP | 138 HP |
Torque | 197 Nm | 170 Nm |
Torque RPM | 3600 RPM | 4400 RPM |
Engine Compression Ratio | 9.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Vehicle Width | 1650 mm | 1700 mm |