2006 Hummer H3 vs. 2010 Alpina B7
To start off, 2010 Alpina B7 is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Hummer H3. In addition, the cost of maintenance, including insurance, on 2006 Hummer H3 would be higher. At 4,396 cc (8 cylinders), 2010 Alpina B7 is equipped with a bigger engine. In terms of performance, 2010 Alpina B7 (493 HP @ 5500 RPM) has 273 more horse power than 2006 Hummer H3. (220 HP @ 5600 RPM) In normal driving conditions, 2010 Alpina B7 should accelerate faster than 2006 Hummer H3.
Because 2006 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 2010 Alpina B7. In wet, icy, snow, or gravel driving conditions, 2006 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alpina B7 (700 Nm @ 4250 RPM) has 395 more torque (in Nm) than 2006 Hummer H3. (305 Nm @ 2800 RPM). This means 2010 Alpina B7 will have an easier job in driving up hills or pulling heavy equipment than 2006 Hummer H3.
Compare all specifications:
| 2006 Hummer H3 | 2010 Alpina B7 | |
| Make | Hummer | Alpina |
| Model | H3 | B7 |
| Year Released | 2006 | 2010 |
| Body Type | SUV | Sedan |
| Engine Position | Front | Front |
| Engine Size | 3457 cc | 4396 cc |
| Engine Cylinders | 5 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 220 HP | 493 HP |
| Engine RPM | 5600 RPM | 5500 RPM |
| Torque | 305 Nm | 700 Nm |
| Torque RPM | 2800 RPM | 4250 RPM |
| Drive Type | 4WD | Rear |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Length | 4750 mm | 5050 mm |
| Vehicle Width | 1900 mm | 1910 mm |
| Vehicle Height | 1880 mm | 1480 mm |
| Wheelbase Size | 2850 mm | 3000 mm |
| Fuel Consumption Overall | 13.8 L/100km | 12.8 L/100km |
| Fuel Tank Capacity | 87 L | 88 L |
